Android

How To Fix No Service Error On Huawei P10 And P10 Plus

A “No Service” error has been reported with the Huawei P10 and P10 Plus phone. This can be due to the phone not being registered on a network. If you purchased your Huawei P10 and P10 Plus phone, but not through one of the cell phone service companies, you will need to read how to restore IMEI number and fix no signal error before reading further in this article.

 

Issues Causing Huawei P10 and P10 Plus No Service Error

Most of the time, when there is a “No Service” error on a Huawei P10 and P10 Plus phone, it’s due to the radio signal being turned off in the phone. This can be caused by WiFi or GPS issues.

 

How To Fix Huawei P10 and P10 Plus No Service

The way to fix a “No Service” issue on a Huawei P10 and P10 Plus is to follow these steps:

  1. Tap your phone app to open it and open the dial pad
  2. Type in (*#*#4636#*#*) and wait. It will automatically send the code
  3. Enter Service mode
  4. Select “Device information” or “Phone information”
  5. Select “Run Ping test”
  6. Select the “Turn Radio Off“button. Your phone will automatically restart
  7. Select reboot

 

Fix IMEI Number

When there is a “No service” error on the Huawei P10 and P10 Plus, most of the time it occurs because of a nulled or unknown IMEI number.

 

Change SIM Card

Sometimes, the SIM card can be causing the “No Service” error. Make sure your SIM card is inserted correctly by removing it then re-inserting it. If your Huawei P10 and P10 Plus phone still has the “No Service” error, try the SIM card in a different phone. If you find the same problem in the other phone, then your SIM card has something wrong with it. You will need to replace your SIM card. Once you have your new SIM card, install it and reboot your Huawei P10 and P10 Plus phone and allow it to connect to the cell phone network.

 

 

Leave a Reply

Close